Importing questions, answered directly

500 m² per colour for wall panels and 1,000 m² for flooring. Trims and accessories are quoted per piece with a 500-piece minimum per profile. For a first order, mixing two or three product lines in one container is usually more useful than reducing the quantity of a single line.

15-25 days after deposit for stock colours and standard sizes. Custom colours, custom panel widths and moulded products such as PU stone take 20-30 days because a die or a colour match is produced first.

Yes. Stock colour samples are dispatched within about three working days by courier, with the freight charged to your account. For custom colours we produce a sample for your written approval before the production run starts.

Wall panels are packed 10 pieces per export carton with corner protection. A 20'GP holds roughly 1,800 m² of 178 mm WPC panel and a 40'HC roughly 3,600 m². Exact figures are stated on each product page and we send a loading plan with every quotation.

30% T/T deposit with the order, 70% against a copy of the bill of lading. Other arrangements can be discussed for repeat customers, and an L/C at sight is acceptable for larger orders.

Yes — fire classification, formaldehyde emission, heavy metal and UV colour-fastness reports for the relevant product lines. Tell us which standard your market requires and we will confirm what is available for that specific product before you order.

WPC and PVC wall panels are classified under 3916.10 or 3916.20 depending on composition. SPC flooring is 3918.10 and WPC decking 3918.90. Flexible and soft stone sheets are usually 6815.99. Confirm the classification with your customs broker, as it can vary by market.

Yes. Panel width, length and thickness are production parameters for the WPC lines. Custom widths require a die, which we waive above a first order of 3,000 m². Colours are matched to a RAL or Pantone reference or to your physical sample.

Yes, outside the direct shower spray zone. WPC, SPC and UV marble panels are all waterproof. The failure mode is water tracking behind an unsealed joint, so specify a neutral-cure sealant at the tray and corner junctions.

Wall panels are either clip-fixed to battens or bonded with MS polymer adhesive to a flat, dry substrate. They are not fixed directly to damp masonry. An installation guide and fixing schedule is supplied with every container.

Yes. We quote FOB Qingdao and CIF to your nominated port side by side so you can compare landed cost. Door-to-door service is available for some destinations — ask with your port and address.

Yes. We produce OEM packaging with your logo, brand name and part numbers, subject to a minimum quantity per item. Send your artwork and packaging specification with the enquiry.