UV Marble Sheets — High-Gloss PVC Marble Wall Panels
A 3 mm sheet that reads as polished marble but weighs under 3.2 kg per m², installs with adhesive and costs a fraction of natural stone.
- 500 m²MOQ per colour
- 15-25 daysProduction lead time
- 3 daysSample dispatch
- 16 linesWall, ceiling & floor
- 100+Export countries
- ISO 9001Quality system
- E0 / B1Formaldehyde & fire
- QingdaoLoading port
UV Marble Sheets overview
A UV marble sheet is a rigid PVC foam board printed with a marble or stone pattern, then sealed under a UV-cured coating. The coating is what separates it from a laminated board: it is hard, scratch resistant and glossy enough to read as polished stone under raking light.
Because the sheet is only 3 mm thick, it can be bonded directly over existing tile, plaster or plywood. That is the commercial argument: no demolition, no wet trades, no tiling crew. A hotel bathroom is closed and back in service within a day.
Standard sheet size is 1,220 × 2,440 mm, which matches a plywood module and a 40'HC pallet. We also cut 1,220 × 2,800 mm and 1,220 × 2,900 mm for walls that run floor to ceiling without a horizontal joint — the reason most hotel projects specify the taller sheet.
Specifications
Confirm the highlighted values against your project drawing before ordering — widths and thicknesses are made to order, not pulled from stock.
| Sheet size | 1,220 × 2,440 mm / 1,220 × 2,800 mm / 1,220 × 2,900 mm |
|---|---|
| Thickness | 3 mm (2 mm and 4 mm on request) |
| Surface | UV-cured high gloss (90–95 GU), matte and satin available |
| Weight | 2.7–3.2 kg/m² (≈ 8–9.5 kg per 1,220 × 2,440 mm sheet) |
| Pattern repeat | Seamless or book-matched, per artwork |
| Core | PVC foam board, closed cell |
| Water absorption | Waterproof; < 0.2% after 24 h immersion |
| Fire performance | B1 (GB 8624) tested |
| Scratch resistance | ≥ 2H pencil hardness on the UV coat |
| Cleaning | Damp cloth; avoid solvent and abrasive pads |
| MOQ | 500 m² per pattern |
| Lead time | 15-25 days after deposit |
| HS code | 3916.20 |
Available colours & surfaces
Carrara whiteStatuario gold veinCalacatta blackGrey sandstoneTravertine beigeTerrazzoWood grain glossCustom artwork
Packing & loading
| Sheets per pallet | ≈ 100 sheets (1,220 × 2,440 mm) |
|---|---|
| Area per pallet | ≈ 297 m² |
| Pallet dimensions | 2,500 × 1,250 × 1,100 mm |
| Weight per pallet | ≈ 950 kg |
| 20'GP load | ≈ 2,400 m² |
| 40'HC load | ≈ 5,400 m² |
| Protective film | Peel-off film on the display face, applied at production |
Product images
Where it is used
- Hotel and apartment bathroom walls and vanity backdrops
- TV walls, headboards and reception feature walls
- Retail display back walls and counter fascias
- Ceilings in wet rooms, where a seamless gloss is wanted
How it is installed
- Acclimatise the sheets flat in the room for 24 hours before cutting.
- Cut with a fine-tooth blade or a laminate knife; cut from the back to avoid chipping the UV coat.
- Bond with neutral-cure silicone or MS polymer adhesive in a bead pattern, leaving a 3 mm gap at edges.
- Seal joints with a colour-matched mastic if the wall is in a wet zone; use a slim H-trim for dry zones.
UV Marble Sheets — buyer questions
Is a UV marble sheet the same as a PVC marble sheet?
In practice yes, and the terms are used interchangeably. Strictly, a UV marble sheet has a UV-cured top coat, which gives higher gloss and better scratch resistance than a plain laminated PVC sheet. Ask what coating is applied, not what the sheet is called.
Can it be installed in a shower?
Yes, if the joints are sealed and the substrate behind is stable. The sheet itself is waterproof. The failure mode is water tracking behind an unsealed joint, so specify a neutral-cure sealant and a continuous bead at the tray junction.
Why do taller sheets cost more per square metre?
Because the yield from a production line drops. A 1,220 × 2,900 mm sheet uses more line time per square metre than a 2,440 mm sheet. The saving on site is fewer horizontal joints, which is usually worth more than the sheet premium.
Related products
WPC Wall Panels
Wood plastic composite wall panels in 159–203 mm widths, 5–9 mm thick, tongue-and-groove jointed, in wood grain and solid colour laminates. The workhorse panel for interior walls in hotels, apartments and retail.
View details →
Bamboo Charcoal Wall Panels
5 mm and 8 mm interior wall boards with a bamboo charcoal composite core and printed decorative film. Large-format 1,220 × 2,800 mm sheets, E0 rated, for fast apartment and hotel wall finishes.
View details →
Acoustic Panels
Recycled PET felt panels and slatted timber acoustic systems for offices, meeting rooms and hospitality. NRC 0.55–0.85 depending on build-up and mounting.
View details →Order UV Marble Sheets for your market
Send your panel schedule and destination port. We reply with an FOB Qingdao per sheet or per m² quotation, a container loading plan and the next available production slot.
Request a quotation on WhatsAppor email info@chanta.group