Wall panels for coffee shops and cafés
A café has two specification problems: it has to be finished on a lease timetable, and it has to stop sounding like a tiled box when it is full.
- 500 m²MOQ per colour
- 15-25 daysProduction lead time
- 3 daysSample dispatch
- 16 linesWall, ceiling & floor
- 100+Export countries
- ISO 9001Quality system
- E0 / B1Formaldehyde & fire
- QingdaoLoading port
What this room demands
Reverberation is the defining complaint in a hard-surfaced café. Bare walls, hard floor and a full room produce a room people leave early. Absorption has to be specified into the finish, not added later.
Behind a counter the wall takes grease, steam and constant cleaning. Porous acoustic material fails there; a sealed slat system or a rigid panel wipes down.
Fit-out windows are short and the landlord expects handover on a date. Panels replace wet trades and are typically installed in days, not weeks.
Specification checklist
- Treat the ceiling and at least one wall for absorption, not the walls alone
- Specify sealed, cleanable finishes behind the counter and in the kitchen pass
- Confirm the acoustic coverage percentage so the treatment is measurable
- Check the fire classification required for a commercial food premises
- Plan signage, shelving and menu board fixings into the panel layout
- Order trims and accessories with the panels so the fit-out is not held up
Installation sequence
- Fix the acoustic strategy first — identify surfaces and coverage before choosing the finish.
- Set out the feature wall from the seating axis so the panel rhythm reads from the customer side.
- Install slat or 3D feature panels on battens with the specified air gap to achieve the absorption figure.
- Use sealed rigid panels behind the counter and in wet or greasy zones.
- Finish corners and counter junctions with trims, and seal all wet-zone joints.
Panels we recommend for coffee shop
UV Marble Sheets
3 mm PVC marble sheets with a UV-cured high-gloss surface. 1,220 × 2,440 mm and 1,220 × 2,900 mm, seamless-look marble and stone patterns, for feature walls, hotel bathrooms and TV backdrops.
View details →
Acoustic Panels
Recycled PET felt panels and slatted timber acoustic systems for offices, meeting rooms and hospitality. NRC 0.55–0.85 depending on build-up and mounting.
View details →
3D Wall Panels
Three-dimensional relief panels in PU and PVC for feature walls. Geometric and organic patterns that catch raking light, supplied paintable or pre-finished in wood and stone effects.
View details →
WPC Timber Tubes
Hollow WPC tubes in 25 × 25 mm to 150 × 60 mm sections for slatted ceilings, screens, column casings and partition framing. Light, straight and waterproof.
View details →Typical quantities
| Room size | Wall area | Panels (2900 × 178 mm) | Suggested order |
|---|---|---|---|
| Small café 40 m² | ≈ 55 m² | ≈ 55 m² panels | 60 m² |
| Coffee shop 80 m² | ≈ 110 m² | ≈ 110 m² panels | 120 m² |
| Bar / restaurant 120 m² | ≈ 165 m² | ≈ 165 m² panels | 180 m² |
| Feature wall only | ≈ 18 m² | ≈ 18 m² | 20 m² |
Add 8–10% for cutting waste and future repairs. Figures are for straight walls with standard door and window openings.
Coffee Shop — buyer questions
What acoustic coverage does a café need?
Start at 30–40% of the total surface area, split between ceiling and wall, and reduce hard floor area if possible. A café with a full hard floor and bare walls needs the higher end of that range to feel comfortable when busy.
Can wood slat panels be used behind a counter?
Yes, if the surface is sealed and the slat gaps are closed. An open slat system with felt behind it will collect grease and is very hard to clean. Specify a sealed variant in that zone.
How fast can a café fit-out be completed with panels?
Wall cladding is typically a few days for a small unit, because there is no plaster drying time and no tiling. The long lead items are usually the counter and the services, not the wall finish.
Fitting out coffee shop?
Send the plan or the wall measurements. We will return a panel take-off, a fixing list and a container loading plan.
Request a quotation on WhatsAppor email info@chanta.group