WPC Timber Tubes — Hollow Wood Plastic Profiles
The linear element that makes a slatted ceiling or screen affordable: no joinery, no warping, no painting, and a section that stays straight over 5.8 metres.
- 500 m²MOQ per colour
- 15-25 daysProduction lead time
- 3 daysSample dispatch
- 16 linesWall, ceiling & floor
- 100+Export countries
- ISO 9001Quality system
- E0 / B1Formaldehyde & fire
- QingdaoLoading port
WPC Timber Tubes overview
WPC timber tubes are hollow extruded profiles that read as timber battens. Sections run from a slim 25 × 25 mm square to a 150 × 60 mm rectangular beam, and lengths up to 5,800 mm without a visible joint.
They are used three ways. As a slatted ceiling they create rhythm and hide services above. As a screen they divide space without blocking light. As a column casing they square off an awkward structural column in minutes rather than building a plastered box.
Because the section is hollow it is light and stiff, and it can carry concealed wiring or LED strip inside the profile. That last point is the reason lighting designers specify tubes: the light source disappears into the architecture rather than sitting on top of it.
Specifications
Confirm the highlighted values against your project drawing before ordering — widths and thicknesses are made to order, not pulled from stock.
| Sections | 25 × 25, 50 × 50, 100 × 50, 150 × 60 mm (custom dies available) |
|---|---|
| Length | 2,900 mm standard, up to 5,800 mm |
| Wall thickness | 1.2–2.0 mm |
| Material | Wood plastic composite, hollow |
| Weight | ≈ 0.45 kg/m at 25 × 25 mm; ≈ 2.1 kg/m at 150 × 60 mm |
| Finishes | Wood grain, solid colour, brushed metal |
| Water resistance | Waterproof; suitable for exterior soffits in the capped range |
| Straightness | ≤ 2 mm per 1,000 mm |
| Bending | Cold-bendable to a large radius; heat-forming available for tight radii |
| Installation | End brackets, concealed clips or internal timber batten |
| MOQ | 500 m per section and finish |
| Lead time | 20-30 days after deposit |
| HS code | 3916.10 |
Available colours & surfaces
Natural oakWalnutTeakWhite matteCharcoalBrushed goldBrushed silverCustom colour
Packing & loading
| Pieces per bundle | 20 pcs (2900 mm) |
|---|---|
| Bundle weight | ≈ 30 kg (100 × 50 mm) |
| Bundle protection | Cardboard wrap with end caps; strapped |
| 40'HC load | ≈ 12,000 m (25 × 25 mm) |
| Handling | Store on a flat rack; do not stand on end |
Product images
Where it is used
- Slatted and louvre ceilings
- Room dividers and decorative screens
- Column casings and bulkhead framing
- Concealed LED cove and linear lighting details
How it is installed
- Set out the slat spacing from the room centre so both end gaps match.
- Fix end brackets or a perimeter frame, then clip or screw the tubes at the recommended centres.
- For long spans, support at 600 mm centres to prevent sag, particularly for slim sections.
- Route concealed LED strip inside the hollow section and blank the ends with the matching cap.
WPC Timber Tubes — buyer questions
How do I bend a WPC tube?
Cold bending works to a large radius, roughly 20 times the section depth. For tighter curves we supply heat-formed profiles made to your radius. Bending on site with a heat gun will distort the surface finish.
What spacing should I use for a slatted ceiling?
Typically 60–100 mm between tubes for a ceiling where services sit above, and 30–50 mm where the ceiling is closed and the slats are purely decorative. Tighter spacing reads as a solid plane from below.
Can tubes be used outdoors?
Yes, in the capped co-extruded range. Standard tubes are for interior and soffit use. Confirm the finish — an exterior application needs the capped skin to avoid surface greying.
Related products
WPC Ceiling Panels
WPC ceiling panels and false ceiling beams for wet rooms, kitchens, bathrooms and lobbies. Moisture-proof, mould resistant, with matching cornice and beam profiles.
View details →Order WPC Timber Tubes for your market
Send your panel schedule and destination port. We reply with an FOB Qingdao per piece or per m² quotation, a container loading plan and the next available production slot.
Request a quotation on WhatsAppor email info@chanta.group